Kingston–Port Ewen Suspension Bridge

Edit links
Coordinates: 41°55′02″N 73°59′03″W / 41.91716°N 73.984165°W / 41.91716; -73.984165
From Wikipedia, the free encyclopedia
Kingston–Port Ewen Suspension Bridge
Bridge looking north into Kingston, 2007.
Coordinates41°55′02″N 73°59′03″W / 41.91716°N 73.984165°W / 41.91716; -73.984165
CarriesWurts St. (Old US 9W)
CrossesRondout Creek
LocaleKingston, New York
Official nameKingston–Port Ewen Suspension Bridge
Maintained byNew York State Department of Transportation
ID number1007350
Characteristics
DesignWire cable Suspension bridge
Total length2 side spans of 176.25 feet (54 m) each, anchorages, total length 1,145 ft (349 m)
Width2 lanes plus walkway, 37 feet (11 m)
Longest span705 feet (215 m)
Clearance below85 ft (26 m)
History
Opened1921
ClosedSeptember 25, 2020
Statistics
Daily traffic15,700
Tollno
Location
Map

The Kingston–Port Ewen Suspension Bridge, sometimes known as the "Rondout Creek bridge", "Old Bridge" or "Wurts Street Bridge", is a steel suspension bridge spanning Rondout Creek, near where it empties into the Hudson River. It connects the City of Kingston to the north, with the village of Port Ewen to the south. Completed in 1921, it was the final link in New York's first north-south highway on the West Shore of the Hudson, and is considered an important engineering accomplishment associated with the development of early motoring.

The bridge has a very hilly approach on the north side and crosses over a small island in the creek. It forms a dramatic backdrop to the Rondout-West Strand Historic District in Kingston, to the east.

Construction[edit]

Construction began in 1916, with the intent to replacing the Rondout Creek chain ferry named Skillypot, known for sporadic service. The Skillypot was named after a derivative of a Dutch word for tortoise, schildpad. [1] The bridge was designed by the firms of Holton D. Robinson and John A. Roebling's Sons Company,[2] with Holton D. Robinson, Daniel E. Moran, William Yates listed as chief engineers[3] Construction was hampered by local political and financial difficulties, as well as material shortages caused by entry by the United States into World War I, and was suspended until 1920.

When construction resumed, David B. Steinman was among the engineering staff, acting as Assistant Engineer. Terry & Tench was the contracting company assigned to build the bridge; remaining completion took about a year. Noteworthy was the work of Danish-American master welder Catherine Nelson, employed by Weehawken Welding Company, who welded together the cable splices that made up the longest length of the cable span.[4] While commonplace during World War II, women working in the trades was opposed by men in the 1920's. Ten thousand people attended the bridge's dedication on November 2, 1921.

Renovation[edit]

The bridge was closed on September 25, 2020, for a three-year reconstruction project estimated to cost $44.6 million.[5]

See also[edit]

References[edit]

  1. ^ (National Park Service site)
  2. ^ information from the Structurae page
  3. ^ Information from the archived Bridgemeister site
  4. ^ "Wurts Street Bridge Film: History". Wurts Street Bridge Film. Retrieved May 23, 2024.
  5. ^ Pineiro-Zucker, Diane (October 15, 2021). "Rondout Creek Bridge $44.6M reconstruction project begins". Daily Freeman. Retrieved November 21, 2022.

External links[edit]

Wikimedia Commons has media related to Kingston - Port Ewen Suspension Bridge.


Retrieved from "https://en.wikipedia.org/w/index.php?title=Kingston–Port_Ewen_Suspension_Bridge&oldid=1225240011"